TSO'd REGULATED DC-DC POWER CONVERTER
(28 to 14Vdc High Power DC Converter)
The KGS model RG56 is a high efficiency, high powered 28 VDC converter that provides regulated 14 Vdc output voltage. The converter is capable of delivering 560 Watts continuously at 28 Vdc input, up to 40 amperes output.
The 14 Vdc output is buck converted from the input voltage and therefore the output voltage is not isolated from the input.
A state of the art "Synchronous Current Mode Switching" topology with Surface Mount Technology (SMT) is used to realize the power conversion. Control circuitry includes use of a popular Synchronous PWM controller for voltage regulation and overload current limit. Protection circuitry includes output over voltage limit and output short circuit current limit.
|Input Voltage:||28 Vdc , Normal Range 22 to 32 Vdc|
|Input Current:||23 Amps typ at 28 Vdc input & @FL|
|0.5 Amps maximum at no load|
|Output Voltage:||14 Vdc Regulated|
|Output Current:||0-40 Amps continuous|
|Regulation:||5% for load, .5% for line and 3% for temperature|
|Overload (OL):||Deliver 110% output power for 2 hours|
|Protection (OL):||Withstands without damage or degradation load exceeding 110% to an output short circuit. Unit delivers rated output power upon removal of the overload condition|
|Protection (SC):||Under a output short circuit condition, the current is limited to approximately 40 Amps|
|Temperature:||-55° C to +71° C|
|Cooling:||Forced air cooling (internal fan) and thermal conduction through bottom plate|
|Compliance:||Designed to meet FAA TSO-C71|
|Environmental:||DO-160D/C by test, design similarity and/or design analysis per: F2VBBB[STX]EWXDFSABAZZXL[XXC1]XXA|
|Finish:||Gold iridite per MIL-C-5541 Class 1A|
|Weight:||2.5 lbs. (1.1 kg)|
|Size:||4.30 W x 6.88 L x 2.75 H inches Less protrusion of connector and
109.2 W x 174.7 L x 69.9 H mm screw heads