SPC-10(J) Series

TSO'D 400HZ STATIC INVERTER
250 VA

The  models listed below are low profile versions of our 250 VA, 400Hz  TSO'D SPC-10( ) series static inverters. These inverters convert 28 VDC electrical power from 18 VDC to 37 VDC input into monophase sinewave, regulated 400 Hz electrical power.

Regulation of the alternating 400 Hz output is accomplished by a single integrated PWM circuit in conjunction with a "True RMS to DC Converter" chip providing both voltage regulation and current limiting.



SPC-10(J) Series

These inverters are primarily designed to power airborne and ground instruments, compasses, gyros, radar and navigation equipment.

Specifications:
Input Voltage: 28 VDC nominal, 24 to 32 VDC normal range.
Current: 10.6 Amp @ 28 VDC input & 1.1 Amp max at no load
Output Power: 250 VA @ 115 Vrms & 150 VA @ 26 Vrms output. Sum of the two outputs not to exceed 250 VA.
Voltage: 115/26 Vrms ± 1.5% typ for load line and temp.
Frequency: 400 Hz ±1%
Regulation: 2% typ. for line load & temperature
Distortion: 3.0% typ. @ 28 VDC in.
Efficiency: 82% minimum.
Protection: Withstands output short circuit condition. Unit delivers rated output signals on removal of short.
Temperature: -55°C to +71°C
Altitude: 55,000 ft.
Environmental: DO-160B env. cat D2BREXXXXXXBBAA/F2BREWXDFSAAAZZ
Size: 2.75" H x 5.00" W x 8.25" L.
6.99 cm H x 12.7 cm W x 20.9 cm L
Weight: 5.4 lbs. (2.45 kg).

LOW PROFILE MODELS ABNORMAL Ein RANGE (VDC) RATING (VA)
115 V 26V
FEATURE
R F Ø
MATING CONNECTOR  PART NO. PIN DES REF.
SPC-10(J) 18-36.4
250 150
X X X
MS3106A18-9S
881 (Switchcraft)		 1
SPC-10(T) 18-36.4
250 150
X
MS3106A18-9S 2
SPC-10(U) 18-36.4
250 150
X X
MS3106A20-16S 3
FEATURES: R = Remote, F = Fault Monitor, Ø =P hase Lock
DES NO. PIN A PIN B PIN C PIN D PIN E PIN F PIN G PIN H PIN I
1 28 VDC 115 VAC AC RTN DC RTN Ø LOCK REMOTE 26 VAC
2 28 VDC 115 VAC AC RTN DC RTN N/C Ø LOCK 26 VAC
3 REMOTE 115 VAC AC RTN CH GND N/C Ø LOCK 26 VAC 28 VDC DC RTN