The SC100 is a lightweight 400Hz static inverter. This model utilizes the latest state of the art, solid state circuitry to invert a 28 Vdc input to a 115 Vac, 400 Hz sine wave output.
Design features include a crystal-controlled oscillator for output frequency stability and a pulse-width-modulated square to sine wave power conversion scheme for efficient & reliable operation.
The SC100 static inverter is primarily designed to power airborne and ground instruments, compasses, gyros, radar and navigation equipment.
SC100
Specifications:
Input Voltage:
28 Vdc (nominal), 20 Vdc to 36.5 Vdc Range
Current:
1.0 Adc nominal at NL; 41.5 Adc at 1 KVA at 28 Vdc.
Output Voltage:
115 Vac ± 3 Vac nominal
Power/Current:
1000 VA / 8.6 Aac
Frequency:
400 Hz ± 0.4 Hz
Phase & Wave Form:
Single phase, Sinewave
Harmonic Distortion:
2.5 % (nominal)
Power Factor:
+0.8 TO -0.8
Efficiency:
87 % (nominal)
Response Time:
300 uSec (No Load to Full Load)
Regulation:
1 % Line, 1 % Load, 2.5 % Temperature
Overload Capacity:
110 % of rated power for 2 hrs, 150 % of rated power for 5 minutes
Protection Circuit:
The inverter will shutdown under the following conditions:
Input voltage ³ 37.5 ± 1Vdc.
Input voltage £ 18 Vdc ± 1.5 Vdc.
Internal high ambient temperature.
Short circuit condition (after 2 to 15 Sec)(manual reset)
Remote On-Off:
Yes (Ground for ON)
Operating Temperature:
-55 ° C to +71 ° C (-65 ° F to +160 ° F)
Weight:
7.5 ± .3 lbs (3.4 ± .14 kgs)
Altitude:
55,000 ft
Environmental
DO-160C Env. Cat. F2ZBBŠLV‹E1XXXXXBXAXXXZXXX
Cooling:
Thermostatically controlled brushless fan (Fan on above 50 ° C)
