The KGS model RH28 converts 14 Vdc input voltage to a regulated 28 Vdc output voltage.The converter is capable of delivering 280 Watts continuously at 28 Vdc and up to 10 amperes output.
A state of the art "Synchronous Current Mode Switching" topology with Surface Mount Technology (SMT) is used to realize the power conversion.Control circuitry includes use of a popular Synchronous PWM controller for voltage regulation and overload current limit. Because of the design topology, a wide input voltage range is possible while delivering highly regulated 28Vdc output power.
RH28
SPECIFICATIONS
Input Voltage:
Normal: 12 to 28 Vdc Abnormal: 8 to 36Vdc
Input Current:
21.8 Amps typ at 14 Vdc input & @FL (0.5 Amps maximum at no load)
Overload:
Unit will not suffer damage or degradation in performance from an overload input current of 50 Amps for 5 Sec or until a 25 Amp input circuit beaker trips
Output Voltage:
28 ± 0.5 Vdc regulated for input voltage from 8 to 28 Vdc (Switching Mode) Follows input voltage for the input above 28 Vdc (Override Mode)
Output Current:
0-10 Amps continuous. 15 amps for 5 minute.
Power:
280 Watts continuous for input voltage from 12 to 28 Vdc. 420 Watts for 5 minutes at 14 Vdc input voltage
Regulation:
1% for line, 1% for load and 1% for temperature
Overload (OL):
Delivers 110% output power for 2 hours minimum
Protection (OL):
Withstands without damage or degradation, loads exceeding 110% of the rated current.Output voltage falls toward input voltage when load exceeds 20 Amps.Unit delivers rated output power upon removal of the overload (OL) conditions.
Protection (SC):
Unit is protected against output short circuit by an external 25 Amp input circuit breaker per MIL-C-5809
