The Model FDB135 is a single phase to 115 Vac, 400 HZ switch-mode converter. Input voltage is 120 Vac. Output voltage is adjustable 0 to 130 Vac with the voltage adjust pot on the front panel. 400 HZ output frequency is adjustable from 320 to 480 HZ. Maximum output power is 1350 VA into any power factor load.
Model FDB135
The FDB135 incorporates overload and short circuit protection. Overload is protected by voltage fold back (constant current) and short circuit is protected by shutdown.
Specifications
Input Voltage:
120 Vac ± 10% (108 to 132 Vac)
Input Frequency:
47 to 440 Hz
OUTPUT:
Voltages:
0 to 130 VACand 0 to 30 VAC
Current:
10 Amp for 0 to 130 VACand 5.77 Amp for 0 to 30 VAC
Crest Factor:
3:1
Power Factor:
100% of rated output into any power factor
Distortion:
1% THD typical at full linear load
Load Regulation:
± 1% No load to Full load
Line Regulation:
± 0.1% for ± 10% line change
Efficiency:
80 to 85 %
PROTECTION CIRCUIT:
Input:
Fuse
Over Current:
Voltage foldback
Short Circuit:
Latches off to protect load.Recycle input power to restore
Thermal:
Over temperature shutdown.
26 VAC:
6 Amp fuse on rear panel
Operating Temperature:
0°C To 55°C
FRONT PANEL METER & CONTROLS:
Power On/Off switch:
Voltage and Frequency Potentiometers
Two digital meters: True RMS Volts, True RMS Amps or Frequency.
Frequency / Amps select switch and indicator
Output On/Off switch & indicator
Two LED’s: Constant current and fault output
Safety socket
MECHANICAL:
Dimensions:
3.5” H x 17” W x 17” Dfor 19” relay rack mounting
Weight:
39 lbs
Input Connection:
IEC 320 C-20 receptacle with 6 foot line cord with NEMA5-15 plug.
