| Specifications: |
| Input Voltage: |
28 Vdc NOM., 24 to 32 Vdc |
| |
18 Vdc to 36.4 Vdc (Abnormal Range) |
| Input Current: |
6.7 Amps typ at 350VA EL load at 28V |
| |
2.8 Amps maximum at no load |
| Output Voltage: |
0-115 Vac regulated |
| Output Current: |
0-3.04 Amps continuous |
| Power: |
350 VA maximum for EL panel |
| Power Factor: |
Zero to -0.2 leading (capacitive) |
| Frequency: |
400 Hz ±2% |
| Distortion: |
5% typ at 28 Vdc for 350VA, -.2pf load |
| Regulation: |
5% for load, 3% for line and 3% for
temperature |
| Control: |
Output voltage 0-115 Vac is controlled by an
external 5 K potentiometer or a 0-5 Vdc source applied at pin F. |
| Isolation: |
Output is isolated from input |
| Overload(OL): |
Deliver 150% output power for 5 min. |
| Protection(OL): |
Withstands without damage or degradation load
exceeding 150% (-.2pf) to an output short circuit. Unit delivers rated output power upon
removal of the overload condition. |
| Protection(SC): |
Under a output short circuit condition, the
input current folds back and the output current is limited to a safe value. |
| Protection(OV): |
Output voltage is limited to 145 Vac maximum |
| Soft-Start: |
Minimum soft start delay of 100 mSec at full
load is provided during an application of step input. |
| Shutdown(SD): |
Output shuts down when input voltage is below
14 Vdc and above 36.4 Vdc. |
| Temperature: |
-55°C to +71 °C |
| Altitude: |
55,000FT |
| Connector: |
Mates with MS3106A18-9S |
| Finish: |
Gold iridite per MIL-C-5541 Class 1 A |
| Weight: |
5.3 LBS (2.4 kg) |
| Size: |
3.45 H x 8.25 W x 3.45 L inches |
| |
113.0 H x 209.5 W x 87.6 L mm |
| |
Less protrusion of connector and screw heads |
