| Specifications: |
| Input Voltage: |
28 Vdc NOM., 24 to 32 Vdc |
| |
18 Vdc to 36.4 Vdc (Abnormal Range) |
| Input Current: |
0.6 Amp typ at 30VA EL load at 28Vdc 0.4 Amp
maximum at no load |
| Output Voltage: |
0-115 Vac regulated |
| Output Current: |
0-.26 Amps continuous |
| Frequency: |
400 Hz ± 2% |
| Distortion
(THD) |
5% typ at 28 Vdc @ 30VA, -.2pf load |
| Power |
30 VA maximum for EL panel |
| Power Factor: |
Zero to –0.2 leading (capacitive) |
| Regulation: |
5% for load, 3% for line and 3% for
temperature |
| Control: |
Output voltage 0-115 Vac is controlled by an
external 5 KW potentiometer or a 0-5 Vdc source applied at pin F. |
| Isolation: |
Output is isolated from input. |
| Overload(OL): |
Deliver 150% output current for 5 min. |
| Protection(OL): |
Withstands without damage or degradation load
exceeding 150% (-.2pf) to an output short circuit. Unit delivers rated output power upon
removal of the overload condition |
| Protection(SC): |
Under a output short circuit condition, the
input current folds back and the output current is limited to a safe value |
| Protection(OV): |
Output voltage is limited to 145 Vac maximum |
| Soft-Start: |
Minimum soft start delay of 100 mSec at full
load is provided during an application of step input voltage to reduce output in rush
current to EL panel. |
| Shutdown(SD): |
Output shuts down when input voltage is below
14 Vdc and above 36.4 Vdc. |
| Temperature: |
-55° C to +71° C |
| Altitude: |
55,000FT |
| Connector: |
Unit mates with MS3106A14S-6S |
| Finish: |
Gold iridite per MIL-C-5541 Class 1A |
| Compliance: |
FAA TSO-C73 |
| Weight: |
1 LB (454 grams) |
| Size: |
2.00 H x 3.18 W x 5.00 L inches |
| |
50.8 H x 80.8 W x 127.0 L mm |
| |
Less protrusion of connector and screw heads |
