Specifications: |
Input Voltage: |
|
Normal
Voltage: |
10 Vdc to 24 Vdc (for
regulated output). |
Abnormal
Range: |
8 Vdc to 35 Vdc. |
Current: |
CH1 |
12.6 Amps typical at 14 Vdc input voltage & at
full load. 19 Amps maximum at 10 Vdc input voltage & at full load. 0.05 Amps maximum at no load. |
|
CH2 |
1.9 Amps typical at 14 Vdc input voltage & at
full load. 3.0 Amps maximum
at 10 Vdc input voltage & at full load. 0.05 Amps maximum at no load. |
Output Voltage: |
CH1 & 2 |
24 Vdc regulated (for input voltage from 10 to 24 Vdc)
Greater than 18 Vdc for input voltage of 8 Vdc. Follows the input voltage
for input above 24 Vdc. |
Power: |
CH1 |
160 Watts continuous for Ein > 10 Vdc. |
|
CH2 |
25 Watts continuous for Ein > 10 Vdc. 185
watts total continuous power (not to exceed) |
Current:
|
CH1
|
6.67
Amps Continuous (full load)
|
|
CH2
|
1.04
Amps Continuous (full load)
|
Regulation: |
CH1 & 2 |
2% for load, 1% for line(10-24 Vdc) and 2% for
temperature. |
Protection
(OL):
|
Withstands,
without damage or degradation, loads exceeding 100% full load. Output collapses to input when load exceeds approximately 190% of
full load current. Unit
delivers rated output upon removal of the overload (OL) condition.
|
Short Circuit (SC) Protection |
Unit is protected against output short circuit by the
tripping of external input circuit breakers. |
Efficiency: |
90%
minimum at 14 Vdc input
|
Temperature: |
-55°C to +71°C
|
Altitude: |
55,000
FT
|
Weight: |
0.75
LBS (340 grams)
|
Size |
1.76 H x 2.20 W x 5.00 L inches |
|
44.7
H x 55.9
W x 127.0 L mm |
|
Less protrusion of connector and screw heads. |
Compliance: |
FAA
TSO-C71
|
