| Specifications: |
| Input Voltage: |
28 Vdc NOM., 22 to 36 Vdc |
| Input Current: |
5.8 Amps typ at 28 Vdc input
& @FL |
| |
0.2 Amps maximum at no load |
| Output Voltage: |
0-28 Vdc regulated |
| Output Current: |
0-5 Amps continuous |
| Regulation: |
3% for load, 2% for line and 3%
for temperature |
| Ripple: |
50 mVpp maximum |
| Overload(OL): |
Deliver 110% output power for 2
hours |
| Protection(OL): |
Withstands without damage or
degradation load exceeding 110% to an output short circuit. Unit delivers rated output
power upon removal of the overload condition |
| Protection(SC): |
Under a output short circuit
condition, the input current folds back and the output current is limited to a safe value |
| Protection(OV): |
Output voltage is limited to 35
Vdc maximum |
| Soft-Start: |
Minimum soft start delay of 200
mSec at full load is provided during an application of step input voltage to reduce output
in rush current to cold (low) resistance of incandescent lamps. |
| Shutdown(SD): |
Output shuts down when input
voltage is below 13 Vdc and above 42 Vdc |
| Efficiency: |
85% typical |
| Temperature: |
-55° C to +71° C |
| Altitude: |
55,000FT |
| Compliance: |
FAA TSO-C71 |
| Environmental: |
DO-160C
ENV. CAT
F2ZBB(MLV)XXXDFSAAAXXXZKXX |
| Connector: |
Unit mates with MS3126F14-5S |
| Finish: |
Gold iridite per MIL-C-5541 Class
1A |
| Weight: |
.95 LBS (430 grams) |
| Size: |
2.00 H x 3.18 W x 5.25 L inches |
| |
50.8 H x 80.8 W x 133.3 L mm |
| |
Less protrusion of connector and
screw heads |
