
REGULATED DC TO DC POWER BOOSTER
FAA TSO-C71
| The RB Series is a pulse width-modulated DC to DC converter that provides
regulated +28 VDC up to 5.0 amperes The converter transforms an unregulated input from a 12V battery to a regulated +28 VDC output in a bootstrap mode. The Model RB Series is primarily intended for use in an aircraft with 12 VDC battery system to operate 28 VDC equipment (especially during periods when the battery is not charged) . |
|
|
|
|
|
|
| Specifications: |
|
||
| Input Voltage: |
|
||
| Input Current: |
|
||
| Output Voltage: |
|
||
| Output Current: |
|
||
| Efficiency @Full Load: |
|
||
| Output Ripple: | 50 mVp-p plus input ripple. | ||
| Regulation: | 2% for line, 2% load and 2% temperature. Refer to graph of input vs. output voltage. | ||
| Load Transient Response: | 2V max. overshoot for 40 mSec typ. from FL to NL. 4V max. undershoot for10 mSec. typ.from NL to FL. |
||
| Protection (Overload): | Output voltage collapses to input DC voltage when load exceeds approx. 6.5 to 7.5 amps. | ||
| Protection: | Overvoltage circuit limits output to approx. 33 VDC. | ||
| Temperature: | -55°C to +71°C (sufficient cooling required @ +71°C ambient); 25 SCFM of air or base plate temperature held @ 71°C | ||
| Altitude: | 55,000 ft. | ||
| Size: | 2.3" H x 2.3" W x 5.8" L. 5.7 cm H x 5.7 cm W x 14.6 cm L |
||
| Weight: | 1.5 lbs. (683 grams). | ||
| Compliance: | FAA TSO-C71 |
External Connections: |
||
| Pin | Description | Remarks |
| A | +13.75 VDC Input | Up to 16 VDC (See specs) |
| B | Common Ground | Input/Output Return |
| C | +28 VDC Output | Regulated, Factory set |
| D | NC | No Connection |
| E | Connected to PIN A | Parallel to input line |
| Model | Receptacle | Mating Connector |
| RB-125 | MS3102A14S-5P | MS3106A14S-5S |
| RB-126 | MS3102A14S-5P | MS3106A14S-5S |
| KGS Electronics Home | On-line Catalog | Service Centers |
| Catalog Request | info@kgselectronics.com | Contact Information |